Jump to content


New Member
  • Content Count

  • Donations

  • Joined

  • Last visited

  • Days Won


Luis last won the day on May 26 2018

Luis had the most liked content!

About Luis

  • User Group: New Member

  • Rank: newbie

  • Post Count: 7

  • Post Ratio: 0.03

  • Total Rep: 3

  • Member Of The Days Won: 1

  • Joined: 05/16/2018

  • Been With Us For: 252 Days

  • Last Activity:

  • Currently:


  1. Luis

    PS3 Does Not Start After System Installation

    I managed to solve it, the problem of everything was even the wifi / bluetooth module. Thank you, the only one who saved me.
  2. Luis

    PS3 Does Not Start After System Installation

    Actually the wifi / bluetooth module is bad, the power is with 2.4v, when I removed the coil marked 5v on the side of the regulator, on the side of the module did not marked short, but I switched the regulator and the voltage drops to 1.2v with the coil and does not maintain 1.8v, so the wifi module is really bad, and so it does not finish the installation, correct? I removed the coil that it feeds to make a test, but it does not work, without the module does not let continue even. I informed a new budget to the client, when approve and change the module to continue the installation I inform here ok. Thank you, it helped me, I did not even think about this wifi / bluetooth module issue!
  3. Luis

    PS3 Does Not Start After System Installation

    I will check if it is faulty, remove the power coil to insulate and test.
  4. Luis

    PS3 Does Not Start After System Installation

    Yes, I used the AVI cable too. It is difficult to solve.
  5. Luis

    PS3 Does Not Start After System Installation

    I used the swizzies dump checker, no bugs, all ok.
  6. Luis

    PS3 Does Not Start After System Installation

    I'm using security mode, my pcb is with built-in BD, but I've tried it with the BD drive and without it. I used other HD and always same thing, strange that if it had brick did not start the system, but it finishes formatting the new HD and completes the installation of the istema and does not start. I checked the dump with PS3DumpChecker and Pyps3checker, they are ok. BWE Warning: 0 Danger: 42 I changed the Ci from Nor memory too. added 2 minutes later I already tried yes, also do not understand why it does not start, the dump done is ok. Thank you for your help.
  7. Hi, sorry for the errors in writing, I'm from Brazil. I have a Ps3 Slim Cech 25xx, I used ps3xploit 2.0 to unlock, I did the dump first and checked it was ok, but at the time of writing in step 3 "Path nor Flash Memory" it froze, no brick, hung up and turned on normal . I tried to use the IP method on the local network, when I did the Dump the machine turned itself off, I turned it on again and started to restore the system, it reaches 100% complete, but it does not start. I used E3 Flasher, I wrote the original dump, and also with the path applied, it starts normal the system installation process, it finishes 100% and it does not start, example in the video below: https://www.youtube.com/watch?v=jvdcj5pucKw can help? thank you